Hi Mates,
I am using RMS 2.0 and my requirement is i need to print the outlet logo on the inovices. How is it possible?
Thanks in Advance RK
Hi Mates,
I am using RMS 2.0 and my requirement is i need to print the outlet logo on the inovices. How is it possible?
Thanks in Advance RK
Did you try putting the picture in the "Picture" folder of the RMS install and changing the store logo via the Admin -> Configuration -> Register tab?
Appologies if this a repost, but I got a "server busy" > Hi Mates,
Hi RK, I don't know for sure that the invoices that you're printing are on a thermal receipt or not, but here are instructions for getting them working on a receipt printer using OPOS. You should be able to make basically the same changes to your invoice and get good results there.
These instructions are from the user "DRS Support" and were posted recently:
Good Luck!
Here are the instructions from our self-help knowledge base article.
Title: What format does Store Operations require for our store logo to be placed on receipts with an OPOS driver?
TIP: If your logo is already the correct size, open it using Start, Programs, Accessories, Paint, and select Save As, type set to Monochrome Bitmap. Then follow the setup instructions below.
First you'll need a thermal receipt printer. Logos cannot be printed on dot matrix printers.
Next you'll need a logo saved as a bitmap (.bmp), in black and white, sized to actual dimension of the printed area. Normally this is about 130-225 pixels wide depending on the format of your logo. Anything wider than 225 pixels will cause the logo to be rendered prior to printing (longer pause before printing).
We suggest you have the logo created in vector format (smooth lines), or over-sized, then resized to exact size before saving (to create as smooth an edge as possible).
Save your logo as a monochrome bitmap (1 bit). If the logo has greyscale edges or accents, it won't print on a thermal receipt printer unless you elimnates shades of grey. If there is a continuous line of greyscale the entire logo will be ignored.
Monochrome bitmap images (2 colors, 1 bit) will always work. This also ensures the file size is small (usually less than 10k). However, you may need to utilize a 16 million color setting while sizing to avoid jagged edges.
Anything larger than 50k is asking for problems.
Place the image in the LOCAL Pictures folder and enter that path in Administrator | File | Configuration | Register | Logo.
Should the Logo appear in the Journal correctly, but not print on the actual Receipt, do the following:
Digital Retail Solutions
"RK" wrote:
BeanSmart website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.