Receipt CC cut on TM-88iii

Lisa,

Try "D" in the "Controller" font.

Good luck, Matt

Where is the "Controller" font? I pulled up my receipt template and did a find for controller and didn't find anything.

Thanks for your help

"Matt" wrote:

Hi, start - setting -right click on the printer- properties- there is an option here for cutting the paper.. sorry i dont have the printer with me right now but i remember chaging something in here.. and also go to SO manager

-database- registers- reciepts formats-double click on the selected receipt - properties- make the cutter true..

h> I am trying to get my receipt printer to automatically cut between the Credit

Lisa,

You have to make up a controller font just like the other fonts at the beginning of the receipt. As a correction, the name of the actual font in the template is "control." Copy and paste another format to the receipt format, then change the font to "Control" and the font's title to whatever you want.

Good luck, Matt

Thanks! I check paper cut at end of page and paper cut at end of document and set to partial cut. Does that seem right? I did that romotely so I will see in the morning. Thanks agains for your help.

Lisa K>

Sounds like you need to re-hire Rob! ;-)

I am just a lowly Tech Support guy.

Lisa, if you are using the Windows Driver it should by default cut the CC Slip. What version of the EPSON driver are you using?

Rob

Could you summarize what the actual commands/syntax needs to be on the template? Thanx in advance!

I wish I could rehire Rob!!! There is a big difference between Rob and the other lowly Tech Support guy.

Thanks for the help Anna. That was were my problem was. Rob had put the current commands on the template I just needed to check partial cut on the printer properties.

Thanks Rob and Jeff for your help also

Lisa

"Rob" wrote:

Lisa --

Hi. I'm not sure I understand exactly what you did...but did it work?!? If so, hopefully you can elaborate a bit on the solution...I'm using the same equipment and have the exact same issue.

Thanx!

Lisa --

Many thanks...email address is rmuller@pacbell.(nospam)net